Type |
Torque Nm |
LMD 037 |
0,37 |
LMD 055 |
0,55 |
LMD 075 |
0,75 |
LMD 110 |
1,1 |
LMD 150 |
1,5 |
LMD 220 |
2,2 |
LMD 300 |
3,0 |
|
Power Range
0.37 - 3.0 kW 3-Phase 380 - 480V (±10%) / 47~63 Hz
Type of Control
V/f Flux Current Control
Overload Capacity
2 ~16 kHz
Enclosure
IP66
EMC Filter
Standard built in Level A1 (EN61800-3-A11), opt. Built in Level B
Main Hardware features
1 Analog Input 0-10V (0/4-20mA with external 500ohm resistor)
3 (+1) Digital Input (programmable multifunction)
1 Relay Output (programmable multifunction)
Integrated PID controller
Standard Integrated Poti on board and RS-232 serial interface
Jumper selection on board: Functions and Ramps
Optional Profibus, DeviceNet, AS-i Interface modules
Optional Brake-motor Control module
Optional Braking Resistor and Chopper module
Keypad
Connectable Basic Operator Panel and Advanced
Operator Panel
Main Functions
Motopotentiometer UP/DOWN control
Multipoint V/f characteristic
I2t and PTC Motor temperature monitoring
Momentary Power Loss and Stall prevention
VDC-max controller
Compound Braking function
DC braking injection
JOG frequency
Selectable Auto-restart
Selectable Stop method
Automatic Alarm Reset and History
Protections: Inverter Overtemperature, Output Short-
Circuit, Grounding Fault, Overvoltage, Overcurrent.
BICO technology |
